On 30.12.22 16:38, Frank Wunderlich wrote:
seems only tx is affected on r3, as i see packets on the vlan from my laptop
tcpdump on R3 (e4:b9:7a:f7:c4:8b is mac from laptop):
13:47:05.265508 e4:b9:7a:f7:c4:8b > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 577: vlan 500, p 0, ethertype IPv4 (0x0800), 192.168.50.2.59389 > 192.168.50.255.21027: UDP, length 531
13:47:05.265548 e4:b9:7a:f7:c4:8b > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 577: vlan 600, p 0, ethertype IPv4 (0x0800), 192.168.60.2.59389 > 192.168.60.255.21027: UDP, length 531
regards Frank
I don't have a setup to test 6.2 on my MT7986 board right now, but I did
test latest OpenWrt with my changes and couldn't reproduce the issue there.
I checked the diff between my tree and upstream and didn't find any
relevant differences in mtk_eth_soc.c
Not sure what's going on or how to narrow it down further.
- Felix
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel