Hi Krzysztof,

On 2022/11/29 23:52, Krzysztof Kozlowski wrote:

On 29/11/2022 11:35, Kunihiko Hayashi wrote:

quoted

Add DT binding schema for components belonging to the platform-specific
DWC3 USB glue layer implemented in UniPhier SoCs.

This USB glue layer works as a sideband logic for the host controller,
including core reset, vbus control, PHYs, and some signals to the
controller.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
  .../socionext,uniphier-dwc3-glue.yaml         | 106 ++++++++++++++++++
  1 file changed, 106 insertions(+)
  create mode 100644
Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml

diff --git
a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
new file mode 100644
index 000000000000..66f8786dd305

--- /dev/null
+++

b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml

@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id:

http://devicetree.org/schemas/soc/socionext/socionext,uniphier-dwc3-glue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC DWC3 USB3.0 glue layer
+
+maintainers:
+  - Kunihiko Hayashi [off-list ref]
+
+description: |+
+  DWC3 USB3.0 glue layer implemented on Socionext UniPhier SoCs is
+  a sideband logic handling signals to DWC3 host controller inside
+  USB3.0 component.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-pro4-dwc3-glue
+          - socionext,uniphier-pro5-dwc3-glue
+          - socionext,uniphier-pxs2-dwc3-glue
+          - socionext,uniphier-ld20-dwc3-glue
+          - socionext,uniphier-pxs3-dwc3-glue
+          - socionext,uniphier-nx1-dwc3-glue
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^reset-controller@[0-9a-f]+$":
+    $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml#
+
+  "^regulator@[0-9a-f]+$":
+    $ref: /schemas/regulator/socionext,uniphier-regulator.yaml#
+
+  "^phy@[0-9a-f]+$":
+    oneOf:
+      - $ref: /schemas/phy/socionext,uniphier-usb3hs-phy.yaml#
+      - $ref: /schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-controller@65b00000 {

Node name: usb. There is no usage of "usb-controller".

I'm confusing about that.

This is an interface logic and doesn't have USB functions by itself.
Surely there is a USB host controller node "usb@..." in the same SoC.
Can this node be renamed to "usb"?

I've renamed the dts node name once in commit 4cc752a88ca9
("arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller").

quoted

+        compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd";
+        reg = <0x65b00000 0x400>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65b00000 0x400>;
+
+        reset-controller@0 {
+            compatible = "socionext,uniphier-ld20-usb3-reset";
+            reg = <0x0 0x4>;

So now I see the unit addresses, which means none of your previous
patches needed them. This raises next question - why this device is
special and does not use syscon but own unit address?

The glue layer has a fixed register address for each child unlike
the previous patch.

This layer has also the other registers for USB core outside
the child nodes, however, there is no parent device that manages
these registers, so this layer node itself should take care of these
registers.

Are the children here - regulator, reset controller and phys - related
to the USB?

Yes, this "glue layer" is an interface of the USB controller, so these
children are only used for the USB controller.

Thank you,
---
Best Regards
Kunihiko Hayashi

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel