[PATCH RFC v2 3/7] ARM: dts: sunxi: fix touchscreen reset GPIO polarity
From: Quentin Schulz <hidden>
Date: 2022-11-21 17:19:52
Also in:
linux-arm-msm, linux-devicetree, linux-input, linux-rockchip, linux-sunxi, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Quentin Schulz <redacted> The reset line is active low for the Goodix touchscreen controller so let's fix the polarity in the Device Tree node. Signed-off-by: Quentin Schulz <redacted> --- arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index fef02fcbbdf82..8c79ecdb40608 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts@@ -114,7 +114,7 @@ gt911: touchscreen@5d { interrupt-parent = <&pio>; interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */ irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */ - reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */ + reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>; /* RST (PB13) */ touchscreen-swapped-x-y; }; };
--
b4 0.10.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel