Thread (9 messages) flat view 9 messages, 2 authors, 2022-11-14
STALE1405d REVIEWED: 13 (13M)

Revision v18 of 11 in this series; 2 review trailers (2 from subsystem maintainers).

Revisions (11)
  1. v11 [diff vs current]
  2. v12 [diff vs current]
  3. v13 [diff vs current]
  4. v14 [diff vs current]
  5. v15 [diff vs current]
  6. v16 [diff vs current]
  7. v17 [diff vs current]
  8. v18 current
  9. v19 [diff vs current]
  10. v20 [diff vs current]
  11. v21 [diff vs current]

[PATCH V18 1/7] dt-bindings: Added the yaml bindings for DCC

From: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Date: 2022-11-11 10:52:10
Also in: linux-arm-msm, linux-devicetree, lkml
Subsystem: arm/qualcomm mailing list, arm/qualcomm support, open firmware and flattened device tree bindings, the rest · Maintainers: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Documentation for Data Capture and Compare(DCC) device tree bindings
in yaml format.

Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
---
 .../devicetree/bindings/soc/qcom/qcom,dcc.yaml     | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml
new file mode 100644
index 0000000..15c56df
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,dcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Data Capture and Compare
+
+maintainers:
+  - Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+
+description: |
+    DCC (Data Capture and Compare) is a DMA engine which is used to save
+    configuration data or system memory contents during catastrophic failure
+    or SW trigger. DCC is used to capture and store data for debugging purpose
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sm8150-dcc
+          - qcom,sc7280-dcc
+          - qcom,sc7180-dcc
+          - qcom,sdm845-dcc
+      - const: qcom,dcc
+
+  reg:
+    items:
+      - description: DCC base register region
+      - description: DCC RAM base register region
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dma@10a2000{
+        compatible = "qcom,sm8150-dcc","qcom,dcc";
+        reg = <0x010a2000 0x1000>,
+              <0x010ad000 0x2000>;
+    };
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help