[PATCH v5 6/7] Bluetooth: Add quirk to disable MWS Transport Configuration
From: Sven Peter <hidden>
Date: 2022-11-04 21:14:44
Also in:
asahi, linux-bluetooth, linux-devicetree, lkml, netdev
Subsystem:
bluetooth subsystem, the rest · Maintainers:
Marcel Holtmann, Luiz Augusto von Dentz, Linus Torvalds
Broadcom 4378/4387 controllers found in Apple Silicon Macs claim to support getting MWS Transport Layer Configuration, < HCI Command: Read Local Supported... (0x04|0x0002) plen 0
HCI Event: Command Complete (0x0e) plen 68
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
[...]
Get MWS Transport Layer Configuration (Octet 30 - Bit 3)]
[...]
, but then don't actually allow the required command:
HCI Event: Command Complete (0x0e) plen 15
Get MWS Transport Layer Configuration (0x05|0x000c) ncmd 1
Status: Command Disallowed (0x0c)
Number of transports: 0
Baud rate list: 0 entries
00 00 00 00 00 00 00 00 00 00
Signed-off-by: Sven Peter <redacted>
---
include/net/bluetooth/hci.h | 10 ++++++++++
include/net/bluetooth/hci_core.h | 3 +++
net/bluetooth/hci_sync.c | 2 +-
3 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 8cd89948f961..110d6df1299b 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h@@ -273,6 +273,16 @@ enum { * during the hdev->setup vendor callback. */ HCI_QUIRK_BROKEN_EXT_SCAN, + + /* + * When this quirk is set, the HCI_OP_GET_MWS_TRANSPORT_CONFIG command is + * disabled. This is required for some Broadcom controllers which + * erroneously claim to support MWS Transport Layer Configuration. + * + * This quirk can be set before hci_register_dev is called or + * during the hdev->setup vendor callback. + */ + HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG, }; /* HCI device flags */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 3cd00be0fcd2..7f585e5dd71b 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h@@ -1719,6 +1719,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn); ((dev)->le_features[3] & HCI_LE_CIS_PERIPHERAL) #define bis_capable(dev) ((dev)->le_features[3] & HCI_LE_ISO_BROADCASTER) +#define mws_transport_config_capable(dev) (((dev)->commands[30] & 0x08) && \ + (!test_bit(HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG, &(dev)->quirks))) + /* ----- HCI protocols ----- */ #define HCI_PROTO_DEFER 0x01
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 76c3107c9f91..d8e9eae17083 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c@@ -4258,7 +4258,7 @@ static int hci_read_local_pairing_opts_sync(struct hci_dev *hdev) /* Get MWS transport configuration if the HCI command is supported */ static int hci_get_mws_transport_config_sync(struct hci_dev *hdev) { - if (!(hdev->commands[30] & 0x08)) + if (!mws_transport_config_capable(hdev)) return 0; return __hci_cmd_sync_status(hdev, HCI_OP_GET_MWS_TRANSPORT_CONFIG,
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel