[PATCH v2 net-next 2/6] dt-bindings: net: dsa: qca8k: utilize shared dsa.yaml
From: Colin Foster <colin.foster@in-advantage.com>
Date: 2022-11-04 04:52:38
Also in:
linux-devicetree, linux-mediatek, lkml, netdev
Subsystem:
networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The dsa.yaml binding contains duplicated bindings for address and size
cells, as well as the reference to dsa-port.yaml. Instead of duplicating
this information, remove the reference to dsa-port.yaml and include the
full reference to dsa.yaml.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
---
v1 -> v2
* Add #address-cells and #size-cells to the switch layer. They aren't
part of dsa.yaml.
* Add unevaluatedProperties: true to the ethernet-port layer so it can
correctly read properties from dsa.yaml.
---
.../devicetree/bindings/net/dsa/qca8k.yaml | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 978162df51f7..d831d5eee437 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml@@ -33,6 +33,10 @@ properties: qca,qca8334: referenced as QCA8334-AL3C QFN 88 pin package qca,qca8337: referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package + '#address-cells': + const: 1 + '#size-cells': + const: 0 reg: maxItems: 1
@@ -66,22 +70,16 @@ properties: With the legacy mapping the reg corresponding to the internal mdio is the switch reg with an offset of -1. +$ref: "dsa.yaml#" + patternProperties: "^(ethernet-)?ports$": type: object - properties: - '#address-cells': - const: 1 - '#size-cells': - const: 0 - patternProperties: "^(ethernet-)?port@[0-6]$": type: object description: Ethernet switch ports - $ref: dsa-port.yaml# - properties: qca,sgmii-rxclk-falling-edge: $ref: /schemas/types.yaml#/definitions/flag
@@ -104,7 +102,7 @@ patternProperties: SGMII on the QCA8337, it is advised to set this unless a communication issue is observed. - unevaluatedProperties: false + unevaluatedProperties: true oneOf: - required:
@@ -116,7 +114,7 @@ required: - compatible - reg -additionalProperties: true +unevaluatedProperties: false examples: - |
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel