[PATCH v2 07/10] ARM: suniv: f1c100s: enable USB on Lichee Pi Nano
From: Icenowy Zheng <hidden>
Date: 2022-10-12 05:58:07
Also in:
linux-devicetree, linux-phy, linux-sunxi, linux-usb, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Lichee Pi Nano has a Micro-USB connector, with its D+, D- pins connected to the USB pins of the SoC and ID pin connected to PE2 GPIO. Enable the USB functionality. Signed-off-by: Icenowy Zheng <redacted> --- No changes since v1. .../arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
index 04e59b8381cb..1935d8c8855b 100644
--- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
+++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts@@ -6,6 +6,8 @@ /dts-v1/; #include "suniv-f1c100s.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Lichee Pi Nano"; compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
@@ -50,8 +52,22 @@ flash@0 { }; }; +&otg_sram { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pe_pins>; status = "okay"; }; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpio = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */ + status = "okay"; +};
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel