Re: [PATCH v3 13/14] clk: at91: sama5d2: Add Generic Clocks for UART/USART
From: <hidden>
Date: 2022-09-16 08:17:31
Also in:
linux-clk, linux-devicetree, linux-serial, linux-spi, lkml
On 13.09.2022 17:22, Sergiu Moga wrote:
Add the generic clocks for UART/USART in the sama5d2 driver to allow them to be registered in the Common Clock Framework. Signed-off-by: Sergiu Moga <redacted> Reviewed-by: Claudiu Beznea <redacted>
Applied to clk-microchip, thanks! Hi, Stephen, I took this patch though clk-microchip and integrated it in the Microchip clock pull request. Thank you, Claudiu Beznea
quoted hunk ↗ jump to hunk
--- v1 -> v2: - Added R-b tag v2 -> v3: - Nothing drivers/clk/at91/sama5d2.c | 10 ++++++++++ 1 file changed, 10 insertions(+)diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c index cfd0f5e23b99..84156dc52bff 100644 --- a/drivers/clk/at91/sama5d2.c +++ b/drivers/clk/at91/sama5d2.c@@ -120,6 +120,16 @@ static const struct { struct clk_range r; int chg_pid; } sama5d2_gck[] = { + { .n = "flx0_gclk", .id = 19, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "flx1_gclk", .id = 20, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "flx2_gclk", .id = 21, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "flx3_gclk", .id = 22, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "flx4_gclk", .id = 23, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart0_gclk", .id = 24, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart1_gclk", .id = 25, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart2_gclk", .id = 26, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart3_gclk", .id = 27, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart4_gclk", .id = 28, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, { .n = "sdmmc0_gclk", .id = 31, .chg_pid = INT_MIN, }, { .n = "sdmmc1_gclk", .id = 32, .chg_pid = INT_MIN, }, { .n = "tcb0_gclk", .id = 35, .chg_pid = INT_MIN, .r = { .min = 0, .max = 83000000 }, },
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel