Thread (20 messages) 20 messages, 5 authors, 2022-09-20
STALE1408d

[PATCH net-next 3/3] dt-bindings: net: dsa: remove label = "cpu" from examples

From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: 2022-09-12 17:51:51
Also in: linux-devicetree, linux-mediatek, linux-renesas-soc, lkml, netdev
Subsystem: arrow speedchips xrs7000 series ethernet switch driver, broadcom b53/sf2 ethernet switch driver, hirschmann hellcreek ethernet switch driver, microchip ksz series ethernet switch driver, networking drivers, networking [dsa], open firmware and flattened device tree bindings, realtek rtl83xx smi dsa router chips, renesas rz/n1 a5psw switch driver, the rest · Maintainers: George McCollister, Florian Fainelli, Jonas Gorski, Kurt Kanzenbach, Woojung Huh, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Alvin Šipraga, Clément Léger, Linus Torvalds 

This is not used by the DSA dt-binding, so remove it from all examples.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 Documentation/devicetree/bindings/net/dsa/ar9331.txt       | 1 -
 .../devicetree/bindings/net/dsa/arrow,xrs700x.yaml         | 1 -
 Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml    | 2 --
 .../devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml  | 1 -
 Documentation/devicetree/bindings/net/dsa/lan9303.txt      | 2 --
 Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt | 1 -
 .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml       | 7 -------
 .../devicetree/bindings/net/dsa/microchip,ksz.yaml         | 2 --
 Documentation/devicetree/bindings/net/dsa/qca8k.yaml       | 3 ---
 Documentation/devicetree/bindings/net/dsa/realtek.yaml     | 2 --
 .../devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml    | 1 -
 .../devicetree/bindings/net/dsa/vitesse,vsc73xx.txt        | 2 --
 12 files changed, 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
index 320607cbbb17..f824fdae0da2 100644
--- a/Documentation/devicetree/bindings/net/dsa/ar9331.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
@@ -76,7 +76,6 @@ eth1: ethernet@1a000000 {
 
 				switch_port0: port@0 {
 					reg = <0x0>;
-					label = "cpu";
 					ethernet = <&eth1>;
 
 					phy-mode = "gmii";
diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
index eb01a8f37ce4..259a0c6547f3 100644
--- a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
@@ -61,7 +61,6 @@ examples:
                 };
                 ethernet-port@3 {
                     reg = <3>;
-                    label = "cpu";
                     ethernet = <&fec1>;
                     phy-mode = "rgmii-id";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
index 2e01371b8288..1219b830b1a4 100644
--- a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
@@ -169,7 +169,6 @@ examples:
 
                 port@8 {
                     reg = <8>;
-                    label = "cpu";
                     phy-mode = "rgmii-txid";
                     ethernet = <&eth0>;
                     fixed-link {
@@ -252,7 +251,6 @@ examples:
 
                 port@8 {
                     ethernet = <&amac2>;
-                    label = "cpu";
                     reg = <8>;
                     phy-mode = "internal";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
index 1ff44dd68a61..73b774eadd0b 100644
--- a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
@@ -91,7 +91,6 @@ examples:
 
                 port@0 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac0>;
                     phy-mode = "mii";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 464d6bf87605..46a732087f5c 100644
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -46,7 +46,6 @@ I2C managed mode:
 
 			port@0 { /* RMII fixed link to master */
 				reg = <0>;
-				label = "cpu";
 				ethernet = <&master>;
 			};
 
@@ -83,7 +82,6 @@ MDIO managed mode:
 
 					port@0 {
 						reg = <0>;
-						label = "cpu";
 						ethernet = <&master>;
 					};
 
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
index e3829d3e480e..8bb1eff21cb1 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
@@ -96,7 +96,6 @@ switch@e108000 {
 
 		port@6 {
 			reg = <0x6>;
-			label = "cpu";
 			ethernet = <&eth0>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 84bb36cab518..bc6446e1f55a 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -325,7 +325,6 @@ examples:
 
                 port@6 {
                     reg = <6>;
-                    label = "cpu";
                     ethernet = <&gmac0>;
                     phy-mode = "rgmii";
 
@@ -389,7 +388,6 @@ examples:
 
                 port@6 {
                     reg = <6>;
-                    label = "cpu";
                     ethernet = <&gmac0>;
                     phy-mode = "trgmii";
 
@@ -454,7 +452,6 @@ examples:
 
                 port@6 {
                     reg = <6>;
-                    label = "cpu";
                     ethernet = <&gmac0>;
                     phy-mode = "2500base-x";
 
@@ -521,7 +518,6 @@ examples:
 
                 port@6 {
                     reg = <6>;
-                    label = "cpu";
                     ethernet = <&gmac0>;
                     phy-mode = "trgmii";
 
@@ -610,7 +606,6 @@ examples:
 
                     port@6 {
                         reg = <6>;
-                        label = "cpu";
                         ethernet = <&gmac0>;
                         phy-mode = "trgmii";
 
@@ -699,7 +694,6 @@ examples:
 
                     port@6 {
                         reg = <6>;
-                        label = "cpu";
                         ethernet = <&gmac0>;
                         phy-mode = "trgmii";
 
@@ -787,7 +781,6 @@ examples:
 
                     port@6 {
                         reg = <6>;
-                        label = "cpu";
                         ethernet = <&gmac0>;
                         phy-mode = "trgmii";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 456802affc9d..4da75b1f9533 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -107,7 +107,6 @@ examples:
                 };
                 port@5 {
                     reg = <5>;
-                    label = "cpu";
                     ethernet = <&eth0>;
                     phy-mode = "rgmii";
 
@@ -146,7 +145,6 @@ examples:
                 };
                 port@6 {
                     reg = <6>;
-                    label = "cpu";
                     ethernet = <&eth0>;
                     phy-mode = "rgmii";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index f3c88371d76c..978162df51f7 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -159,7 +159,6 @@ examples:
 
                 port@0 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac1>;
                     phy-mode = "rgmii";
 
@@ -221,7 +220,6 @@ examples:
 
                 port@0 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac1>;
                     phy-mode = "rgmii";
 
@@ -268,7 +266,6 @@ examples:
 
                 port@6 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac1>;
                     phy-mode = "sgmii";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
index 4f99aff029dc..1a7d45a8ad66 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -189,7 +189,6 @@ examples:
                             };
                             port@5 {
                                     reg = <5>;
-                                    label = "cpu";
                                     ethernet = <&gmac0>;
                                     phy-mode = "rgmii";
                                     fixed-link {
@@ -277,7 +276,6 @@ examples:
                             };
                             port@6 {
                                     reg = <6>;
-                                    label = "cpu";
                                     ethernet = <&fec1>;
                                     phy-mode = "rgmii";
                                     tx-internal-delay-ps = <2000>;
diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
index 14a1f0b4c32b..7ca9c19a157c 100644
--- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -130,7 +130,6 @@ examples:
             port@4 {
                 reg = <4>;
                 ethernet = <&gmac2>;
-                label = "cpu";
                 phy-mode = "internal";
 
                 fixed-link {
diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
index bbf4a13f6d75..258bef483673 100644
--- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
+++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
@@ -75,7 +75,6 @@ switch@0 {
 		};
 		vsc: port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac1>;
 			phy-mode = "rgmii";
 			fixed-link {
@@ -117,7 +116,6 @@ switch@2,0 {
 		};
 		vsc: port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&enet0>;
 			phy-mode = "rgmii";
 			fixed-link {
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Other recent patches touching these files
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help