Re: [PATCH v2 2/5] dt-bindings: net: Add Broadcom BCM4377 family PCIe Bluetooth
From: Hector Martin <hidden>
Date: 2022-09-08 11:30:37
Also in:
asahi, linux-bluetooth, linux-devicetree, lkml, netdev
On 08/09/2022 20.19, Krzysztof Kozlowski wrote:
On 07/09/2022 19:09, Sven Peter wrote:quoted
+ + brcm,board-type: + $ref: /schemas/types.yaml#/definitions/string + description: Board type of the Bluetooth chip. This is used to decouple + the overall system board from the Bluetooth module and used to construct + firmware and calibration data filenames. + On Apple platforms, this should be the Apple module-instance codename + prefixed by "apple,", e.g. "apple,atlantisb". + pattern: '^apple,.*' + + brcm,taurus-cal-blob: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: A per-device calibration blob for the Bluetooth radio. This + should be filled in by the bootloader from platform configuration + data, if necessary, and will be uploaded to the device. + This blob is used if the chip stepping of the Bluetooth module does not + support beamforming.Isn't it: s/beamforming/beam forming/ ?
Nope, it's one word: https://en.wikipedia.org/wiki/Beamforming - Hector _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel