From: Chen-Yu Tsai <wenst@chromium.org>

With device frequency scaling, the mux clock that (indirectly) feeds the
device selects between a dedicated PLL, and some other stable clocks.

When a clk rate change is requested, the (normally) upstream PLL is
reconfigured. It's possible for the clock output of the PLL to become
unstable during this process.

To avoid causing the device to glitch, the mux should temporarily be
switched over to another "stable" clock during the PLL rate change.
This is done with clk notifiers.

This patch adds common functions for notifiers to temporarily and
transparently reparent mux clocks.

This was loosely based on commit 8adfb08605a9 ("clk: sunxi-ng: mux: Add
clk notifier functions").

Reviewed-by: Miles Chen <redacted>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel