Re: [PATCH v2 4/4] arm64: dts: allwinner: beelink-gs1: Enable GPU OPP

On 9/3/22 2:06 PM, Clément Péron wrote:

Hi Samuel,

On Sat, 3 Sept 2022 at 20:41, Clément Péron [off-list ref] wrote:

quoted

Hi Samuel,

On Tue, 23 Aug 2022 at 05:07, Samuel Holland [off-list ref] wrote:

quoted

On 8/21/22 12:30 PM, Clément Péron wrote:

quoted

Enable GPU OPP table for Beelink GS1

Signed-off-by: Clément Péron <redacted>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 6249e9e02928..20fc0584d1c6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

@@ -5,6 +5,7 @@

 #include "sun50i-h6.dtsi"
 #include "sun50i-h6-cpu-opp.dtsi"
+#include "sun50i-h6-gpu-opp.dtsi"

 #include <dt-bindings/gpio/gpio.h>

@@ -261,6 +262,7 @@ reg_dcdca: dcdca {
                      };

                      reg_dcdcc: dcdcc {
+                             regulator-always-on;

Why is this necessary? This file already has:

This is a relica from the first serie at this time the OPP doesn't
properly enable the regulator it's now fixed since:
https://patchwork.kernel.org/project/linux-pm/patch/81eb2efeeed1556d124065252f32777838a6d850.1589528491.git.viresh.kumar@linaro.org/

This should have nothing to do with the OPP driver; lima already has a "mali"
regulator consumer that should be enabled whenever the GPU is in use.

_Adding_ a regulator consumer from the OPP driver should not somehow decrease
the refcount.

quoted

I will drop it.

After retesting it, it seems to still no take the regulator and make
my board hang... :(

[   17.698597] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI
I2C bus driver
[   17.708475] sun4i-drm display-engine: bound 6000000.hdmi (ops
sun8i_dw_hdmi_ops [sun8i_drm_hdmi])
[   17.718350] [drm] Initialized sun4i-drm 1.0.0 20150629 for
display-engine on minor 1
[   17.877443] Console: switching to colour frame buffer device 320x90
[   17.936050] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb
frame buffer device
[   17.961881] platform 5200000.usb: deferred probe pending

quoted

quoted

quoted

quoted

[   31.710731] vdd-gpu: disabling <<<<<

Are there any messages from lima, especially about mali-supply? Can you provide
regulators_summary from debugfs?

Regards,
Samuel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel