On 31.07.2022 23:11, Jonathan Cameron wrote:

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

On Tue, 28 Jun 2022 18:16:31 +0300
Claudiu Beznea [off-list ref] wrote:

quoted

Add runtime PM support by disabling/enabling ADC's peripheral clock.
On simple conversion the ADC's clock is kept enabled just while the
conversion is in progress. This includes also temperature conversion.
For triggered buffers and touch conversions the ADC clock is kept enabled
while the triggered buffers or touch are enabled. Along with it removed
the __maybe_unused on suspend() and resume() ops as the dev_pm_ops
object members are now filled with SYSTEM_SLEEP_PM_OPS().

Signed-off-by: Claudiu Beznea <redacted>

Hi Claudia,

This patch crossed with a mass conversion series taking lots of drivers
over to the new PM ops macros. That covered some of the changes in here.
I've hand applied this but please check I didn't mess it up.

Hi, Jonathan,

I've tested it on a SAMA5D2 and it was good.

Thank you for taking care of it.
Claudiu Beznea

Thanks,

Jonathan

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel