On Fri, Jul 22, 2022 at 09:28:08AM +0100, Russell King (Oracle) wrote:

On Fri, Jul 22, 2022 at 12:36:45AM +0300, Vladimir Oltean wrote:

quoted

On Thu, Jul 21, 2022 at 10:14:00PM +0100, Russell King (Oracle) wrote:

quoted

quoted

quoted

So currently we try to enable C37 AN in 2500base-x mode, although
the standard says that it shouldn't be there, and it shouldn't be there
presumably because they want it to work with C73 AN.

I don't know how to solve this issue. Maybe declare a new PHY interface
mode constant, 2500base-x-no-c37-an ?

So this is essentially what I'm asking, and you didn't necessarily fully
answer. I take it that there exist Marvell switches which enable in-band
autoneg for 2500base-x and switches which don't, and managed = "in-band-status"
has nothing to do with that decision. Right?

I think we're getting a little too het up over this.

No, I think it's relevant to this patch set.

quoted

We have 1000base-X where, when we're not using in-band-status, we don't
use autoneg (some drivers that weren't caught in review annoyingly do
still use autoneg, but they shouldn't). We ignore the ethtool autoneg
bit.

We also have 1000base-X where we're using in-band-status, and we then
respect the ethtool autoneg bit.

So, wouldn't it be logical if 2500base-X were implemented the same way,
and on setups where 2500base-X does not support clause 37 AN, we
clear the ethtool autoneg bit? If we have 2500base-X being used as the
media link, surely this is the right behaviour?

The ethtool autoneg bit is only relevant when the PCS is the last thing
before the medium. But if the SERDES protocol connects the MAC to the PHY,
or the MAC to another MAC (such as the case here, CPU or DSA ports),
there won't be any ethtool bit to take into consideration, and that's
where my question is. Is there any expected correlation between enabling
in-band autoneg and the presence or absence of managed = "in-band-status"?

This topic is something I was looking at back in November 2021, trying
to work out what the most sensible way of indicating to a PCS whether
it should enable in-band or not:

http://git.armlinux.org.uk/cgit/linux-arm.git/commit/?h=net-queue&id=e4ea7d035e7e04e87dfd86702f59952e0cecc18d
http://git.armlinux.org.uk/cgit/linux-arm.git/commit/?h=net-queue&id=e454bf101fa457dd5c2cea0b1aaab7ba33048089
http://git.armlinux.org.uk/cgit/linux-arm.git/commit/?h=net-queue&id=e2c57490f205ae7c0e11fcf756675937f933be5e

The intention there was to move the decision about whether a PCS should
enable autoneg out of the PCS and into phylink, but doing that one comes
immediately on the problem of (e.g.) Marvell NETA/PP2 vs Lynx having
different interpretations for 2500base-X. There are also a number of
drivers that do not follow MLO_AN_INBAND-means-use-inband or not for
things such as SGMII or 1000base-X.

This means we have no standard interpretation amongst phylink users
about when in-band signalling should be enabled or disabled, which
means moving that decision into phylink today isn't possible.

The only thing we could do is provide the PCS with an additional bit
of information so it can make the decision - something like a boolean
"pcs_connects_to_medium" flag, and keep the decision making in the
PCS-specific code - sadly keeping the variability between different
PCS implementations.

The way I understand what you're saying is that there is no guarantee
that the DSA master and CPU port will agree whether to use in-band
autoneg or not here (and implicitly, there is no guarantee that this
link will work):

	&eth0 {
		phy-mode = "2500base-x";
		managed = "in-band-status";
	};

	&switch_cpu_port {
		ethernet = <&eth0>;
		phy-mode = "25000base-x";
		managed = "in-band-status";
	};

similarly, there is a good chance that the DT description below might
result in a functional link:

	&eth0 {
		phy-mode = "2500base-x";
		managed = "in-band-status";
	};

	&switch_cpu_port {
		ethernet = <&eth0>;
		phy-mode = "25000base-x";

		fixed-link {
			speed = <2500>;
			full-duplex;
		};
	};

There is no expectation from either DT description to use in-band
autoneg or not.

The fact that of_phy_is_fixed_link() was made by Stas Sergeev to say
that a 'managed' link with the value != 'auto' is fixed prompted me to
study exactly what those changes were about.

Was the managed = "in-band-status" property introduced by Stas Sergeev
in this commit:

commit 4cba5c2103657d43d0886e4cff8004d95a3d0def
Author: Stas Sergeev [off-list ref]
Date:   Mon Jul 20 17:49:57 2015 -0700

    of_mdio: add new DT property 'managed' to specify the PHY management type

    Currently the PHY management type is selected by the MAC driver arbitrary.
    The decision is based on the presence of the "fixed-link" node and on a
    will of the driver's authors.
    This caused a regression recently, when mvneta driver suddenly started
    to use the in-band status for auto-negotiation on fixed links.
    It appears the auto-negotiation may not work when expected by the MAC driver.
    Sebastien Rannou explains:
    << Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's
    a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with
    inband status) is connected to the switch through QSGMII, and in this context
    we are on the media side of the PHY. >>
    https://lkml.org/lkml/2015/7/10/206

    This patch introduces the new string property 'managed' that allows
    the user to set the management type explicitly.
    The supported values are:
    "auto" - default. Uses either MDIO or nothing, depending on the presence
    of the fixed-link node
    "in-band-status" - use in-band status

    Signed-off-by: Stas Sergeev [off-list ref]

    CC: Rob Herring [off-list ref]
    CC: Pawel Moll [off-list ref]
    CC: Mark Rutland [off-list ref]
    CC: Ian Campbell [off-list ref]
    CC: Kumar Gala [off-list ref]
    CC: Florian Fainelli [off-list ref]
    CC: Grant Likely [off-list ref]
    CC: devicetree@vger.kernel.org
    CC: linux-kernel@vger.kernel.org
    CC: netdev@vger.kernel.org
    Signed-off-by: David S. Miller [off-list ref]

not added specifically to mean whether the MAC should use in-band
autoneg or not? See commit f8af8e6eb950 ("mvneta: use inband status only
when explicitly enabled") for the mvneta change, after which the code
became:

mvneta_probe:

	err = of_property_read_string(dn, "managed", &managed);
	pp->use_inband_status = (err == 0 &&
				 strcmp(managed, "in-band-status") == 0);

mvneta_defaults_set:

	if (pp->use_inband_status) {
		val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
		val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
			 MVNETA_GMAC_FORCE_LINK_DOWN |
			 MVNETA_GMAC_AN_FLOW_CTRL_EN);
		val |= MVNETA_GMAC_INBAND_AN_ENABLE |
		       MVNETA_GMAC_AN_SPEED_EN |
		       MVNETA_GMAC_AN_DUPLEX_EN;
		mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
	} else {
		val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
		val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
		       MVNETA_GMAC_AN_SPEED_EN |
		       MVNETA_GMAC_AN_DUPLEX_EN);
		mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
	}

mvneta_port_power_up:

	if (pp->use_inband_status)
		ctrl |= MVNETA_GMAC2_INBAND_AN_ENABLE;

This is why I am asking whether there is any formal definition of what
managed = "in-band-status" means. You've said it means about retrieving
link status from the PCS. What are you basing upon when you are saying that?

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel