[PATCH v1 2/4] dt-bindings: gpio: stmpe: Remove node name requirement
From: Francesco Dolcini <hidden>
Date: 2022-07-12 11:03:02
Also in:
linux-devicetree, linux-gpio, linux-iio, linux-input, lkml
Subsystem:
gpio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
STMPE driver does not require a specific node name anymore, only the compatible is checked, update binding according to this. Signed-off-by: Francesco Dolcini <redacted> --- Documentation/devicetree/bindings/gpio/gpio-stmpe.txt | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
index a0e4cf885213..b33f8f02c0d7 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt@@ -8,8 +8,7 @@ Optional properties: - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable due to different usage (e.g. touch, keypad) -Node name must be stmpe_gpio and should be child node of stmpe node to which it -belongs. +Node should be child node of stmpe node to which it belongs. Example: stmpe_gpio {
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel