Re: [PATCH v2 2/4] dt-bindings: usb: mtk-xhci: Make all clocks required
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: 2022-07-07 01:11:20
Also in:
linux-devicetree, linux-mediatek, linux-usb, lkml
On Tue, 2022-07-05 at 16:36 -0400, Nícolas F. R. A. Prado wrote:
On Sat, Jul 02, 2022 at 04:24:12PM +0800, Chunfeng Yun wrote:quoted
On Fri, 2022-07-01 at 15:37 -0600, Rob Herring wrote:quoted
On Wed, Jun 29, 2022 at 02:55:46PM -0400, Nícolas F. R. A. Prado wrote:quoted
On Tue, Jun 28, 2022 at 08:57:45AM +0800, Chunfeng Yun wrote:quoted
Hi Nícolas, On Thu, 2022-06-23 at 15:37 -0400, Nícolas F. R. A. Prado wrote:quoted
All of the clocks listed in the binding are always wired to the XHCI controller hardware blocks on all SoCs. The reason some clocks were made optional in the binding was to account for the fact that depending on the SoC, some of the clocks might be fixed (ie not controlled by software). Given that the devicetree should represent the hardware, make all clocks required in the binding. Subsequent patches will make the DTS changes to specify fixed-clocks for the clocks that aren't controllable. Signed-off-by: Nícolas F. R. A. Prado < nfraprado@collabora.com> --- Changes in v2: - Undid clock list changes that allowed middle clocks to be missing from v1 and made all clocks required instead - Rewrote commit message and title Documentation/devicetree/bindings/usb/mediatek,mtk- xhci.yaml | 4 + --- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk- xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk- xhci.yaml index 63cbc2b62d18..1444d18ef9bc 100644--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml@@ -67,7 +67,6 @@ properties: maxItems: 1 clocks: - minItems: 1 items: - description: Controller clock used by normal mode - description: Reference clock used by low powermode etc@@ -76,9 +75,8 @@ properties: - description: controller clock clock-names: - minItems: 1 items: - - const: sys_ck # required, the following ones areoptional + - const: sys_ck - const: ref_ck - const: mcu_ck - const: dma_ckThis patch causes more check warning, I prefer to leave dt- bindings unchanged, but just fix mt8195's dts warning instead, thanks a lotHi Chunfeng, the warnings reported by Rob's bot only happen if patches 3 and 4 aren't applied to adapt the devicetrees. They are ABI breaking changes, but I understood this as the desired solution from the discussion we had with Krzysztof on v1 [1].The warnings have nothing to do with patches 3 and 4 as those are for dts files. It's examples in bindings that are the problem.Sorry, you're right, I misread the errors.quoted
Yes, I mean almost all existing dts supporting mtk-xhci will also cause similar warnings, as changes in patches 3, 4; It seems less flexible to make all clock required, not only changes all existing ones but also need more changes if additional clock is added.Yes, that's a valid concern. I must have misunderstood the discussion in v1 then. So, I'm going to send a revert for this change and send a new patch adding fixed clocks on the dts for just mt8192 and mt8195 to fix the dtbs_check warnings. Does that sound good?
Yes, sound good, thanks a lot
Thanks, Nícolas
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel