Thread (9 messages) 9 messages, 2 authors, 2022-07-04

Re: [PATCH v4 3/3] ARM: dts: lan966x: Add UDPHS support

From: <hidden>
Date: 2022-07-04 05:39:38
Also in: linux-clk, linux-devicetree, linux-usb, lkml

Hi, Herve,

On 01.07.2022 17:03, Herve Codina wrote:
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Hi Claudiu,>
On Fri, 1 Jul 2022 10:56:46 +0000
[off-list ref] wrote:
quoted
On 01.07.2022 10:09, Herve Codina wrote:
quoted
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Add UDPHS (the USB High Speed Device Port controller) support.

The both lan966x SOCs (LAN9662 and LAN9668) have the same UDPHS
IP. This IP is also the same as the one present in the SAMA5D3
SOC.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 arch/arm/boot/dts/lan966x.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 3cb02fffe716..c98e7075c2b4 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -458,6 +458,17 @@ cpu_ctrl: syscon@e00c0000 {
                        reg = <0xe00c0000 0x350>;
                };

+               udc: usb@e0808000 {
+                       compatible = "microchip,lan9662-udc",
+                                    "atmel,sama5d3-udc";
+                       reg = <0x00200000 0x80000>,
+                             <0xe0808000 0x400>;
+                       interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
+                       clock-names = "pclk", "hclk";
+                       status = "disabled";
+               };
+
I have these compilation warnings:

  DTC     arch/arm/boot/dts/lan966x-pcb8291.dtb
arch/arm/boot/dts/lan966x.dtsi:461.21-470.5: Warning (simple_bus_reg):
/soc/usb@e0808000: simple-bus unit address format error, expected "200000"
  DTC     arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb
arch/arm/boot/dts/lan966x.dtsi:461.21-470.5: Warning (simple_bus_reg):
/soc/usb@e0808000: simple-bus unit address format error, expected "200000"
  DTC     arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dtb
arch/arm/boot/dts/lan966x.dtsi:461.21-470.5: Warning (simple_bus_reg):
/soc/usb@e0808000: simple-bus unit address format error, expected "200000"
I am a bit confused but these warnings do not appear on my side (patches
based on v5.19-rc1).
What is the exact command that leads to these warning ?
Have you tried with CONFIG_SOC_LAN966 enabled?

Thank you,
Claudiu Beznea
Thanks,
Hervé

--
Hervé Codina, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help