Re: [PATCH 2/6] pinctrl: sunxi: Add I/O bias setting for H6 R-PIO
From: Heiko Stuebner <heiko@sntech.de>
Date: 2022-07-01 13:03:48
Also in:
linux-devicetree, linux-gpio, linux-sunxi, lkml
Am Sonntag, 26. Juni 2022, 04:11:43 CEST schrieb Samuel Holland:
H6 requires I/O bias configuration on both of its PIO devices.
Previously it was only done for the main PIO.
The setting for Port L is at bit 0, so the bank calculation needs to
account for the pin base. Otherwise the wrong bit is used.
Fixes: cc62383fcebe ("pinctrl: sunxi: Support I/O bias voltage setting on H6")
Signed-off-by: Samuel Holland <samuel@sholland.org>On a D1-Nezha Tested-by: Heiko Stuebner <heiko@sntech.de> _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel