[PATCH RESEND v9 5/5] arm64: dts: apm: Harmonize DWC USB3 DT nodes name
From: Serge Semin <hidden>
Date: 2022-06-24 14:36:55
Also in:
linux-arm-msm, linux-devicetree, linux-usb, linuxppc-dev, lkml
Subsystem:
applied micro (apm) x-gene device tree support, the rest · Maintainers:
Khuong Dinh, Linus Torvalds
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named despite of the warning comment about possible backward compatibility issues. Signed-off-by: Serge Semin <redacted> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 4 ++-- arch/arm64/boot/dts/apm/apm-storm.dtsi | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index a83c82c50e29..832dd85b00bd 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi@@ -597,8 +597,8 @@ serial0: serial@10600000 { interrupts = <0x0 0x4c 0x4>; }; - /* Do not change dwusb name, coded for backward compatibility */ - usb0: dwusb@19000000 { + /* Node-name might need to be coded as dwusb for backward compatibility */ + usb0: usb@19000000 { status = "disabled"; compatible = "snps,dwc3"; reg = <0x0 0x19000000 0x0 0x100000>;
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 0f37e77f5459..1520a945b7f9 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi@@ -923,8 +923,8 @@ sata3: sata@1a800000 { phy-names = "sata-phy"; }; - /* Do not change dwusb name, coded for backward compatibility */ - usb0: dwusb@19000000 { + /* Node-name might need to be coded as dwusb for backward compatibility */ + usb0: usb@19000000 { status = "disabled"; compatible = "snps,dwc3"; reg = <0x0 0x19000000 0x0 0x100000>;
@@ -933,7 +933,7 @@ usb0: dwusb@19000000 { dr_mode = "host"; }; - usb1: dwusb@19800000 { + usb1: usb@19800000 { status = "disabled"; compatible = "snps,dwc3"; reg = <0x0 0x19800000 0x0 0x100000>;
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel