On Fri, 10 Jun 2022 19:05:36 +0200, Frank Wunderlich wrote:
From: Frank Wunderlich <redacted>
Convert txt binding to yaml binding for Mediatek switches.
Signed-off-by: Frank Wunderlich <redacted>
---
v4:
- fix squash of port 5 as cpu-port
- drop type from interrupt-controller and add depency for this
- use ethernet-ports in examples
- drop address-/size-cells
v3:
- include standalone patch in mt7530 series
- drop some descriptions (gpio-cells,reset-gpios,reset-names)
- drop | from descriptions
- move patternProperties above allOf
v2:
- rename mediatek.yaml => mediatek,mt7530.yaml
- drop "boolean" in description
- drop description for interrupt-properties
- drop #interrupt-cells as requirement
- example: eth=>ethernet,mdio0=>mdio,comment indention
- replace 0 by GPIO_ACTIVE_HIGH in first example
- use port(s)-pattern from dsa.yaml
- adress/size-cells not added to required because this
is defined at mdio-level inc current dts , not switch level
---
.../bindings/net/dsa/mediatek,mt7530.yaml | 406 ++++++++++++++++++
.../devicetree/bindings/net/dsa/mt7530.txt | 327 --------------
2 files changed, 406 insertions(+), 327 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
delete mode 100644 Documentation/devicetree/bindings/net/dsa/mt7530.txt
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel