[PATCH v1 1/4] pinctrl: add generic driving setup property on mt8192
From: Guodong Liu <hidden>
Date: 2022-06-08 07:18:45
Also in:
linux-devicetree, linux-gpio, linux-mediatek, lkml
Subsystem:
pin control subsystem, pin controller - mediatek, the rest · Maintainers:
Linus Walleij, Sean Wang, Linus Torvalds
This patch provides generic driving setup, which support 2/4/6/8/10/12/14/16mA driving, original driver just set raw data setup setting when use drive-strength property Signed-off-by: Guodong Liu <redacted> --- drivers/pinctrl/mediatek/pinctrl-mt8192.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
index acccde9262ba..9faf7001369d 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c@@ -1372,8 +1372,8 @@ static const struct mtk_pin_soc mt8192_data = { .gpio_m = 0, .bias_set_combo = mtk_pinconf_bias_set_combo, .bias_get_combo = mtk_pinconf_bias_get_combo, - .drive_set = mtk_pinconf_drive_set_raw, - .drive_get = mtk_pinconf_drive_get_raw, + .drive_set = mtk_pinconf_drive_set_rev1, + .drive_get = mtk_pinconf_drive_get_rev1, .adv_pull_get = mtk_pinconf_adv_pull_get, .adv_pull_set = mtk_pinconf_adv_pull_set, .adv_drive_get = mtk_pinconf_adv_drive_get,
--
2.25.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel