Thread (8 messages) 8 messages, 3 authors, 2022-07-05
STALE1480d LANDED

[PATCH v5 3/3] ARM: dts: sun8i-r40: Add thermal trip points/cooling maps

From: <hidden>
Date: 2022-05-17 01:38:09
Also in: linux-devicetree, linux-pm, linux-sunxi, lkml
Subsystem: the rest · Maintainer: Linus Torvalds

From: qianfan Zhao <redacted>

For the trip points, I used values from the BSP code.

The critical trip point value is 30°C above the maximum recommended
ambient temperature (85°C) for the SoC from the datasheet, so there's
some headroom even at such a high ambient temperature.

Signed-off-by: qianfan Zhao <redacted>
---
 arch/arm/boot/dts/sun8i-r40.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index ae2a5ebd9924..b43f3f72a915 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -86,6 +86,7 @@ cpu0: cpu@0 {
 			reg = <0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -94,6 +95,7 @@ cpu1: cpu@1 {
 			reg = <1>;
 			clocks = <&ccu CLK_CPU>;
 			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -102,6 +104,7 @@ cpu2: cpu@2 {
 			reg = <2>;
 			clocks = <&ccu CLK_CPU>;
 			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -110,6 +113,7 @@ cpu3: cpu@3 {
 			reg = <3>;
 			clocks = <&ccu CLK_CPU>;
 			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -125,6 +129,30 @@ cpu_thermal: cpu0-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu_thermal: gpu-thermal {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help