[PATCH] arm: sunxi: fix f1c100s pinctrl function.
From: IotaHydrae <hidden>
Date: 2022-05-04 11:59:52
Also in:
linux-gpio, linux-sunxi, lkml
Subsystem:
arm/allwinner sunxi soc support, pin control subsystem, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Linus Walleij, Linus Torvalds
1. change suniv f1c100s pinctrl,PD14 multiplexing function lvds1 to uart2 When the pin PD13 and PD14 is setting up to uart2 function in dts, there's an error occurred: 1c20800.pinctrl: unsupported function uart2 on pin PD14 Because 'uart2' is not any one multiplexing option of PD14, and pinctrl don't know how to configure it. So change the pin PD14 lvds1 function to uart2. Signed-off-by: IotaHydrae <redacted> --- drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
index 2801ca706273..68a5b627fb9b 100644
--- a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
+++ b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c@@ -204,7 +204,7 @@ static const struct sunxi_desc_pin suniv_f1c100s_pins[] = { SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION(0x2, "lcd"), /* D20 */ - SUNXI_FUNCTION(0x3, "lvds1"), /* RX */ + SUNXI_FUNCTION(0x3, "uart2"), /* RX */ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)), SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 15), SUNXI_FUNCTION(0x0, "gpio_in"),
--
2.32.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel