Thread (1 message) 1 message, 1 author, 2022-04-22

Re: [PATCH v3 0/2] DSS: Add support for DisplayPort

From: Nishanth Menon <nm@ti.com>
Date: 2022-04-22 16:17:35
Also in: linux-devicetree, lkml

On 19:46-20220422, Rahul T R wrote:
On 12:51-20220415, Vignesh Raghavendra wrote:
quoted

On 06/04/22 10:28 pm, Rahul T R wrote:
quoted
The following series of patches enables DisplayPort on
j721e-evm

Tomi Valkeinen (2):
  arm64: dts: ti: k3-j721e-main: add DP & DP PHY
  arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm

v2:
   - use phandle with a parameter to refer clocks insted of
     sub nodes in serdes_wiz node
   - move phy link node to board DTS file

v3:
   - Fix the regulator node name as per the DT spec
   - Use Macro for GPIO type

boot logs:
   https://gist.githubusercontent.com/ravi-rahul/1bdbc3f77ab381e486c8394650c2e85d/raw/f04584c30181821c4ee83aee7781a9ba143cd3f3/j7_DP_upstream.log

kernel patch verify report:
   https://gist.githubusercontent.com/ravi-rahul/a982fef3fae03ec0dbdd5cb475a4cb25/raw/c8230370746e9878daf9527c3aa9d82eed7aa33c/report-kernel-patch-verify.txt
Hmm, With dtbs_check I see (on v5.18-rc1 tag)

+/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: ports: 'port@0' is a required property
+/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: ports: 'port@4' is a required property
+/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: 'phys' is a required property
+/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: 'phy-names' is a required property

This goes away with 2/2 although adds:
+<stdout>: Warning (graph_child_address): /bus@100000/dss@4a00000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary


Do we need to have empty ports node in j721e-main.dtsi for dp-bridge?   And something similar wrt phys as well?

Regards
Vignesh
Hi Vignesh,

Thanks for the review!
Not sure why kernel patch verify did not catch this
if you are'nt able to install all the required packages and version of
packages, then use the kpv wrapper script for docker container that
already packages things.
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help