[PATCH v2 11/22] drm/imx: ipuv3-plane: Remove redundant zpos initialisation

The imx KMS driver will call drm_plane_create_zpos_property() with an
init value depending on the plane purpose.

Since the initial value wasn't carried over in the state, the driver had
to set it again in ipu_plane_state_reset(). However, the helpers have
been adjusted to set it properly at reset, so this is not needed
anymore.

Cc: linux-arm-kernel@lists.infradead.org
Cc: NXP Linux Team <redacted>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Maxime Ripard <redacted>
---
 drivers/gpu/drm/imx/ipuv3-plane.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c
index 846c1aae69c8..414bdf08d0b0 100644
--- a/drivers/gpu/drm/imx/ipuv3-plane.c
+++ b/drivers/gpu/drm/imx/ipuv3-plane.c

@@ -297,7 +297,6 @@ void ipu_plane_disable_deferred(struct drm_plane *plane)
 
 static void ipu_plane_state_reset(struct drm_plane *plane)
 {
-	unsigned int zpos = (plane->type == DRM_PLANE_TYPE_PRIMARY) ? 0 : 1;
 	struct ipu_plane_state *ipu_state;
 
 	if (plane->state) {

@@ -311,8 +310,6 @@ static void ipu_plane_state_reset(struct drm_plane *plane)
 
 	if (ipu_state) {
 		__drm_atomic_helper_plane_reset(plane, &ipu_state->base);
-		ipu_state->base.zpos = zpos;
-		ipu_state->base.normalized_zpos = zpos;
 		ipu_state->base.color_encoding = DRM_COLOR_YCBCR_BT601;
 		ipu_state->base.color_range = DRM_COLOR_YCBCR_LIMITED_RANGE;
 	}

-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel