Re: [PATCH v5 19/23] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi

On 2/10/22 12:47, Sascha Hauer wrote:

On Thu, Feb 10, 2022 at 01:10:32AM +0100, Johan Jonker wrote:

quoted

Hi Sascha,

Something with port and endpoint gives notifications.
Somehow with the conversion of rockchip,dw-hdmi.txt to YAML not all SoC
options were checked/covered (see rk3328 and rk3568).

Allow multiple vop:
port or
port@0
1x vop -> endpoint

2x vop -> endpoint@0
       -> endpoint@1

Also allow for connector:
(not all existing DT have this yet)
port@1
      -> endpoint

See also at graph.yaml

Ok, let me see if I get this right. The HDMI can either have one or two
ports. It has one when the HDMI connector is not described in the device
tree and two when it is. Also the first (or only) port can have one or
two endpoints. It has one endpoint when the SoC has a single VOP and two
endpoints when the SoC has two VOPs.

It's been a painful morning because my YAML knowledge is fairly limited,
but here's what I came up with:

  ports:
    $ref: /schemas/graph.yaml#/properties/ports
    unevaluatedProperties: false
    patternProperties:
      "^port(@0)?$":
        $ref: /schemas/graph.yaml#/properties/port
        description: Input of the DWC HDMI TX
        properties:
          endpoint:
            description: Connection to the VOP
          endpoint@0:
            description: Connection to the VOPB
          endpoint@1:
            description: Connection to the VOPL
    properties:
      port@1:
        $ref: /schemas/graph.yaml#/properties/port
        description: Output of the DWC HDMI TX

Does this look sane to you? With this a make dtbs_check on this binding
doesn't generate warnings anymore, and even better it does generate
warnings when I add some wrong nodes/properties to the dts files.

Hi,

Send a patch to rob+dt and he will let you know... ;)

Also could you test the ARM branch as well just for sure with:
ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make  dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml

Could you group your serie a bit:
dt-bindings
drm patches
dts changes

Johan

quoted

===

dtc -I dtb -O dts rk3568-evb1-v10.dtb
<stdout>: Warning (avoid_unnecessary_addr_size):
/hdmi@fe0a0000/ports/port@1: unnecessary #address-cells/#size-cells
without "ranges" or child "reg" property
<stdout>: Warning (graph_child_address): /hdmi@fe0a0000/ports/port@0:
graph node has single child node 'endpoint@0',
#address-cells/#size-cells are not necessary
<stdout>: Warning (graph_child_address): /hdmi@fe0a0000/ports/port@1:
graph node has single child node 'endpoint', #address-cells/#size-cells
are not necessary

That's easy. I dropped the @0 suffix and reg property from the node.

Sascha

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel