On 11/02/2022 13:43:12+0100, Maxime Ripard wrote:
Hi Samuel,
On Mon, Feb 07, 2022 at 05:54:02PM -0600, Samuel Holland wrote:
quoted
On 2/7/22 3:00 AM, Maxime Ripard wrote:
quoted
On Wed, 2 Feb 2022 20:17:35 -0600, Samuel Holland wrote:
quoted
The RTC power domain in sun6i and newer SoCs manages the 16 MHz RC
oscillator (called "IOSC" or "osc16M") and the optional 32 kHz crystal
oscillator (called "LOSC" or "osc32k"). Starting with the H6, this power
domain also handles the 24 MHz DCXO (called variously "HOSC", "dcxo24M",
or "osc24M") as well. The H6 also adds a calibration circuit for IOSC.
Later SoCs introduce further variations on the design:
- H616 adds an additional mux for the 32 kHz fanout source.
- R329 adds an additional mux for the RTC timekeeping clock, a clock
for the SPI bus between power domains inside the RTC, and removes the
IOSC calibration functionality.
[...]
Applied to local tree (sunxi/clk-for-5.18).
Part of the build failures were because this patch depends on patch 3. Is that
okay, or should I update this patch to be independent?
We don't have anything queued up yet, so I think the easiest would be to
merge this through the RTC tree. So nothing to do on your side yet, we
just need Alex to answer :)
I can take the whole series but I think I would need acks from Stephen
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel