Re: [RFC PATCH v4 00/12] Add support for BCM2835 camera interface (unicam)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: 2022-02-04 00:38:50
Also in:
linux-devicetree, linux-media, lkml
Hi Stefan, On Thu, Feb 03, 2022 at 08:55:42PM +0100, Stefan Wahren wrote:
Am 03.02.22 um 18:49 schrieb Jean-Michel Hautbois:quoted
Hello ! This patch series adds the BCM2835 CCP2/CSI2 camera interface named unicam. This driver is already used in the out-of-tree linux-rpi repository [1], and this work aims to support it in mainline. The series is based on top of: - Rebased on top of 5.16 Tomi Valkeinen's multiplexed stream work, on his multistream/work branch [2] which has been submitted as v10 at the time of this writing. The objective is to demonstrate the use of multiplexed streams on a real world widely used example as well as supporting unicam mainline. - The "Add 12bit and 14bit luma-only formats" series [3] is partly applied (the Y10P format bug) the new formats are now part of this series.i understand, that you want to have this integrated fast but you send v3 of this series yesterday. This is not enough time for reviewers. Usually 1 to 2 weeks.
v3 was incorrectly based on the out-of-tree ISP driver, which caused some patches to not apply correctly on top of mainline. I've asked Jean-Michel to fix this and send a v4, as it was difficult to review v3. -- Regards, Laurent Pinchart _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel