On 24/01/2022 03:29, Jammy Huang wrote:

On 2022/1/21 下午 03:30, Hans Verkuil wrote:

quoted

On 12/22/21 09:21, Jammy Huang wrote:

quoted

This is a workaround for sync polarity unstable.
Sync value get by VR09C counts from sync's rising edge, which means
sync's polarity is negative if sync value is bigger than total/2.

Do you have an example of such a format, or is this mostly theoretical?

Either provide the example or make a note that it is theoretical.

OK, I will update an example in next patch. Let me explain first.

This is a must-be result. Please refer to the graph below as I sent in 3/4 of this
series. For negative sync, sync width equals to back porch + data enable + front porch.
Thus, sync would be bigger than 90% of total in most cases.

Right, I suspected that might be the case.

I think it would be better to combine patches 3 and 4 into a single
patch, since they are closely related and it is actually easier to
understand if it's just a single patch.

Regards,

	Hans

                  +-------------------+
                  |    v i d e o      |
      +--+  +-----+                   +-----+  +---+
         |  |                               |  |
         +--+                               +--+
       vsync+-------------------------------+
   frame_top+-----+
frame_bottom+-------------------------+


Following registers are what I got for 1920x1200@60.

1e700090: 07ee206f 04c9001a c4d3efff 04cc001f

1e7000a0: 0000081f 00000000 00000000 00000000

vertical total = 0x4D3 (VR098[27:16]) = 1235
vertical sync = 0x4CC (VR09C[27:16]) = 1228

quoted

Regards,

    Hans

quoted

Signed-off-by: Jammy Huang <redacted>
---
  v2:
   - Use 'total/2' rather than 'total<<1'
   - Update comment
---
  drivers/media/platform/aspeed-video.c | 20 ++++++++++++++++++++
  1 file changed, 20 insertions(+)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 7c50567f5ab0..c3e3343d91e1 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c

@@ -989,6 +989,16 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)

            video->frame_bottom = FIELD_GET(VE_SRC_TB_EDGE_DET_BOT, src_tb_edge);
          video->frame_top = FIELD_GET(VE_SRC_TB_EDGE_DET_TOP, src_tb_edge);
+
+        /*
+         * This is a workaround for polarity detection when the sync
+         * value is larger than half.
+         */
+        if (vsync > (vtotal / 2))
+            det->polarities &= ~V4L2_DV_VSYNC_POS_POL;
+        else
+            det->polarities |= V4L2_DV_VSYNC_POS_POL;
+
          if (det->polarities & V4L2_DV_VSYNC_POS_POL) {
              det->vbackporch = video->frame_top - vsync;
              det->vfrontporch = vtotal - video->frame_bottom;

@@ -1003,6 +1013,16 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)

            video->frame_right = FIELD_GET(VE_SRC_LR_EDGE_DET_RT, src_lr_edge);
          video->frame_left = FIELD_GET(VE_SRC_LR_EDGE_DET_LEFT, src_lr_edge);
+
+        /*
+         * This is a workaround for polarity detection when the sync
+         * value is larger than half.
+         */
+        if (hsync > (htotal / 2))
+            det->polarities &= ~V4L2_DV_HSYNC_POS_POL;
+        else
+            det->polarities |= V4L2_DV_HSYNC_POS_POL;
+
          if (det->polarities & V4L2_DV_HSYNC_POS_POL) {
              det->hbackporch = video->frame_left - hsync;
              det->hfrontporch = htotal - video->frame_right;

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel