On Wed, 15 Dec 2021 16:02:44 -0500, Peter Geis wrote:

Good Afternoon,

This is my series to support the usb2 phy devices on the rk356x.
The rk356x phy has a single muxed interrupt and has moved the usb2phy
nodes out of the grf and into their own nodes.
The phy needs to tie back into the grf for register control, similar to
the rv1108.
By moving the phys into their own nodes, they now have full
#address_cells = 2 register addresses, but they still reside below the 32bit
mmio range.

[...]

Applied, thanks!

[1/8] dt-bindings: soc: rockchip: add rk3568-usb2phy-grf
      commit: 0c8662341dfdda1e0a59692e4d78ecb087f09da1
[7/8] arm64: dts: rockchip: add usb2 nodes to rk3568 device tree
      commit: cca4da59db28cdd284d34835be9f109f37bf0803
[8/8] arm64: dts: rockchip: add Quartz64-A usb2 support
      commit: 80d44c01e56943fcf9d0b5267ccfaa9487ac8067

Best regards,
-- 
Heiko Stuebner [off-list ref]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel