Hi Alexandre,

Thank you for the review.

On Fri, Dec 24, 2021 at 3:03 PM Alexandre Belloni
[off-list ref] wrote:

On 24/12/2021 14:57:48+0000, Lad Prabhakar wrote:

quoted

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/pinctrl/pinctrl-at91-pio4.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index fafd1f55cba7..ebfb106be97d 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c

@@ -1045,7 +1045,6 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
      const char **group_names;
      const struct of_device_id *match;
      int i, ret;
-     struct resource *res;
      struct atmel_pioctrl *atmel_pioctrl;
      const struct atmel_pioctrl_data *atmel_pioctrl_data;

@@ -1164,16 +1163,15 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)

      /* There is one controller but each bank has its own irq line. */
      for (i = 0; i < atmel_pioctrl->nbanks; i++) {
-             res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
-             if (!res) {
+             ret = platform_get_irq_optional(pdev, i);

I don't think the irq should be optional here.

The only difference between platform_get_irq() and
platform_get_irq_optional() is that platform_get_irq() prints an error
message in case of error. Since we are already printing an sane error
message "missing irq resource for group %c\n" in the driver I've
chosen platform_get_irq_optional() instead platform_get_irq().

Let me know if you want me to drop platform_get_irq_optional() and use
platform_get_irq() instead, in that case I'll also drop the error
message "missing irq resource for group %c\n" from the driver.

Cheers,
Prabhakar

quoted

+             if (ret < 0) {
                      dev_err(dev, "missing irq resource for group %c\n",
                              'A' + i);
-                     return -EINVAL;
+                     return ret;
              }
-             atmel_pioctrl->irqs[i] = res->start;
-             irq_set_chained_handler_and_data(res->start,
-                     atmel_gpio_irq_handler, atmel_pioctrl);
-             dev_dbg(dev, "bank %i: irq=%pr\n", i, res);
+             atmel_pioctrl->irqs[i] = ret;
+             irq_set_chained_handler_and_data(ret, atmel_gpio_irq_handler, atmel_pioctrl);
+             dev_dbg(dev, "bank %i: irq=%d\n", i, ret);
      }

      atmel_pioctrl->irq_domain = irq_domain_add_linear(dev->of_node,
--
2.17.1

--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel