[PATCH-next 1/2] arm64: dts: ti: k3-j721s2: Move aliases to board dts
From: Vignesh Raghavendra <vigneshr@ti.com>
Date: 2021-12-23 12:17:35
Also in:
linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
From: Aswath Govindraju <redacted> Aliases are board specific and should be in board dts files. So, move aliases to board dts and trim the list to interfaces that are actually enabled. Signed-off-by: Aswath Govindraju <redacted> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Kishon Vijay Abraham I <redacted> --- .../dts/ti/k3-j721s2-common-proc-board.dts | 10 +++++++++ arch/arm64/boot/dts/ti/k3-j721s2.dtsi | 22 ------------------- 2 files changed, 10 insertions(+), 22 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index a5a24f9f46c5..708c14338eb7 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts@@ -19,6 +19,16 @@ chosen { bootargs = "console=ttyS10,115200n8 earlycon=ns16550a,mmio32,2880000"; }; + aliases { + serial1 = &mcu_uart0; + serial10 = &main_uart8; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; + can0 = &main_mcan16; + can1 = &mcu_mcan0; + can2 = &mcu_mcan1; + }; + evm_12v0: fixedregulator-evm12v0 { /* main supply */ compatible = "regulator-fixed";
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
index 80d3cae03e88..fe5234c40f6c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi@@ -21,28 +21,6 @@ / { #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &wkup_uart0; - serial1 = &mcu_uart0; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - serial5 = &main_uart3; - serial6 = &main_uart4; - serial7 = &main_uart5; - serial8 = &main_uart6; - serial9 = &main_uart7; - serial10 = &main_uart8; - serial11 = &main_uart9; - mmc0 = &main_sdhci0; - mmc1 = &main_sdhci1; - can0 = &main_mcan16; - can1 = &mcu_mcan0; - can2 = &mcu_mcan1; - can3 = &main_mcan3; - can4 = &main_mcan5; - }; - chosen { }; cpus {
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel