Thread (27 messages) 27 messages, 7 authors, 2022-02-10

Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-12-20 12:54:25
Also in: linux-i2c, linux-renesas-soc, linux-sh, lkml

Hi Prabhakar,

On Mon, Dec 20, 2021 at 12:56 PM Lad, Prabhakar
[off-list ref] wrote:
On Mon, Dec 20, 2021 at 10:18 AM Geert Uytterhoeven
[off-list ref] wrote:
quoted
On Sat, Dec 18, 2021 at 5:59 PM Lad Prabhakar
[off-list ref] wrote:
quoted
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
Thanks for your patch!
quoted
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional() for DT users only.
Why only for DT users?
Plenty of driver code shared by Renesas ARM (DT-based) on SuperH
(non-DT) SoCs already uses platform_get_irq_optional(), so I expect
that to work for both.
For the non DT users the IRQ resource is passed as a range [0] and not
a single interrupt so I went with this approach. Is there a way I'm
missing where we could still use platform_get_irq_xyz() variants for
such cases?
Oh, I didn't realize it used a single resource with a range.
Is this common, i.e. would it make sense to add support for this to
platform_get_irq_optional()?
quoted
quoted
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
quoted
quoted
+                       if (irq <= 0 && irq != -ENXIO)
+                               return irq ? irq : -ENXIO;
Can irq == 0 really happen?

All SuperH users of the "i2c-sh_mobile" platform device use an
evt2irq() value that is non-zero.

I might have missed something, but it seems the only user of IRQ 0 on
SuperH is smsc911x Ethernet in arch/sh/boards/board-apsh4a3a.c and
arch/sh/boards/board-apsh4ad0a.c, which use evt2irq(0x200).
I'll keep that in mind if the Ethernet driver falls in the convection
patch changes.
The Ethernet driver was converted 6 years ago, cfr. commit
965b2aa78fbcb831 ("net/smsc911x: fix irq resource allocation failure").
[0] https://elixir.bootlin.com/linux/v5.16-rc6/source/arch/sh/kernel/cpu/sh4a/setup-sh7724.c#L454
Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help