Re: (EXT) Re: [PATCH v3 3/7] arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx

Am Donnerstag, dem 16.12.2021 um 22:26 +0200 schrieb Abel Vesa:

On 21-12-01 08:29:44, Alexander Stein wrote:

quoted

With the device tree in place, enable missing drivers as modules,
if
possible. PHY driver needs built-in for interrupt support.

Signed-off-by: Alexander Stein <
alexander.stein@ew.tq-group.com

quoted

---
Changes in v3:
* None

Changes in v2:
* Add interconnect driver for imx8mm and imx8mn

 arch/arm64/configs/defconfig | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/configs/defconfig

b/arch/arm64/configs/defconfig
index 0da6a944d5cd..44ce56dd2638 100644

--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig

@@ -363,6 +363,7 @@ CONFIG_MICROSEMI_PHY=y
 CONFIG_AT803X_PHY=y
 CONFIG_REALTEK_PHY=y
 CONFIG_ROCKCHIP_PHY=y
+CONFIG_DP83867_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m

@@ -397,6 +398,7 @@ CONFIG_TOUCHSCREEN_EDT_FT5X06=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PM8941_PWRKEY=y
 CONFIG_INPUT_PM8XXX_VIBRATOR=m
+CONFIG_INPUT_PWM_BEEPER=m
 CONFIG_INPUT_PWM_VIBRA=m
 CONFIG_INPUT_HISI_POWERKEY=y
 # CONFIG_SERIO_SERPORT is not set

@@ -556,6 +558,7 @@ CONFIG_BATTERY_MAX17042=m
 CONFIG_CHARGER_BQ25890=m
 CONFIG_CHARGER_BQ25980=m
 CONFIG_SENSORS_ARM_SCPI=y
+CONFIG_SENSORS_JC42=m
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m

@@ -793,6 +796,7 @@ CONFIG_SND_SOC_RT5659=m
 CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
 CONFIG_SND_SOC_SIMPLE_MUX=m
 CONFIG_SND_SOC_TAS571X=m
+CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
 CONFIG_SND_SOC_WCD934X=m
 CONFIG_SND_SOC_WM8904=m
 CONFIG_SND_SOC_WM8960=m

@@ -908,6 +912,7 @@ CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_HYM8563=m
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
+CONFIG_RTC_DRV_PCF85063=m
 CONFIG_RTC_DRV_PCF85363=m
 CONFIG_RTC_DRV_M41T80=m
 CONFIG_RTC_DRV_RX8581=m

@@ -1175,6 +1180,8 @@ CONFIG_SLIM_QCOM_NGD_CTRL=m
 CONFIG_MUX_MMIO=y
 CONFIG_INTERCONNECT=y
 CONFIG_INTERCONNECT_IMX=m
+CONFIG_INTERCONNECT_IMX8MM=m
+CONFIG_INTERCONNECT_IMX8MN=m

Nope. The interconnect doesn't work without imx8m-ddrc
and imx-bus devfreq drivers. Those drivers do not work
yet. 

So please drop the interconnect configs for now.

They have been applied to next already, see [1]. Shawn, do you want a
revert for those 2 options then?

Best regards,
Alexander

[1] 
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/arch/arm64/configs/defconfig?id=2ecc02a6b3f0e2a4339952c4f8b86a4d87876930



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel