[PATCH v3 2/8] arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source
From: Li Yang <hidden>
Date: 2021-12-14 09:33:00
Also in:
lkml
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
From: Biwen Li <redacted> Add flextimer2 based ftm_alarm1 node and enable it to be the default rtc wakeup source for rdb and qds boards instead of the original flextimer1 which is used by PWM. The ftm_alarm0 node hence is disabled by default. Signed-off-by: Biwen Li <redacted> Signed-off-by: Li Yang <redacted> --- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 6 +++++- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 6 +++++- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 9 +++++++++ 3 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 6e2a1da662fb..00d5b81bdef3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts@@ -25,7 +25,7 @@ aliases { serial1 = &duart1; mmc0 = &esdhc; mmc1 = &esdhc1; - rtc1 = &ftm_alarm0; + rtc1 = &ftm_alarm1; }; chosen {
@@ -234,6 +234,10 @@ mt35xu02g0: flash@0 { }; }; +&ftm_alarm1 { + status = "okay"; +}; + &i2c0 { status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 7719f44bcaed..41900d351a92 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts@@ -21,7 +21,7 @@ aliases { serial1 = &duart1; mmc0 = &esdhc; mmc1 = &esdhc1; - rtc1 = &ftm_alarm0; + rtc1 = &ftm_alarm1; }; chosen {
@@ -132,6 +132,10 @@ mt35xu02g0: flash@0 { }; }; +&ftm_alarm1 { + status = "okay"; +}; + &i2c0 { status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 9010c535252a..f2564faf7067 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi@@ -1198,6 +1198,15 @@ ftm_alarm0: timer@2800000 { reg = <0x0 0x2800000 0x0 0x10000>; fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + ftm_alarm1: timer@2810000 { + compatible = "fsl,ls1028a-ftm-alarm"; + reg = <0x0 0x2810000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; };
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel