Thread (47 messages) 47 messages, 4 authors, 2022-01-20
STALE1606d
Revisions (8)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 current
  4. v5 [diff vs current]
  5. v6 [diff vs current]
  6. v7 [diff vs current]
  7. v8 [diff vs current]
  8. v9 [diff vs current]

[PATCH v3 13/23] ARM: dts: at91: sama7g5: add nodes for video capture

From: Eugen Hristev <hidden>
Date: 2021-12-13 13:53:26
Also in: linux-devicetree, linux-media, lkml
Subsystem: the rest · Maintainer: Linus Torvalds

Add node for the XISC (eXtended Image Sensor Controller) and CSI2DC
(csi2 demux controller).
These nodes represent the top level of the video capture hardware pipeline
and are directly connected in hardware.

Signed-off-by: Eugen Hristev <redacted>
---
Changes in v3:
- change bus width for endpoints to the default 14

 arch/arm/boot/dts/sama7g5.dtsi | 48 ++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)
diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
index 7039311bf678..4d0a93541d5f 100644
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -236,6 +236,54 @@ sdmmc2: mmc@e120c000 {
 			status = "disabled";
 		};
 
+		csi2dc: csi2dc@e1404000 {
+			compatible = "microchip,sama7g5-csi2dc";
+			reg = <0xe1404000 0x500>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>;
+			clock-names = "pclk", "scck";
+			assigned-clocks = <&xisc>;
+			assigned-clock-rates = <266000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					csi2dc_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					csi2dc_out: endpoint {
+						bus-width = <14>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+						remote-endpoint = <&xisc_in>;
+					};
+				};
+			};
+		};
+
+		xisc: xisc@e1408000 {
+			compatible = "microchip,sama7g5-isc";
+			reg = <0xe1408000 0x2000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+			clock-names = "hclock";
+			#clock-cells = <0>;
+			clock-output-names = "isc-mck";
+
+			port {
+				xisc_in: endpoint {
+					bus-width = <14>;
+					hsync-active = <1>;
+					vsync-active = <1>;
+					remote-endpoint = <&csi2dc_out>;
+				};
+			};
+		};
+
 		pwm: pwm@e1604000 {
 			compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
 			reg = <0xe1604000 0x4000>;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help