On Mittwoch, 8. Dezember 2021 19:54:45 CET Johan Jonker wrote:

This phy can be used as pcie-phy, usb3-phy, sata-phy or sgmii-phy.

=============================================

Changed V4 by Johan Jonker:
  TEST COMPILED ONLY!
  Driver not verified with hardware!
  Produced in the hope that we can get some review progress
  with this serie for the documents and driver.
  Use at your own risk!

  restyle
  add devm_reset_control_array_get()
  remove clk structure
  change refclk DT parse
  change dev_err message
  add dot to phrase
  add ext_refclk variable
  add enable_ssc variable
  rename rockchip_combphy_param_write
  remove param_read
  replace rockchip-naneng-combphy driver name

  rename node name
  remove reset-names
  move #phy-cells
  add rockchip,rk3568-pipe-grf
  add rockchip,rk3568-pipe-phy-grf

=============================================

Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>

Applied this on top of 5.16-rc4, added the necessary device tree
changes to rk356x.dtsi and rk3566-quartz64-a.dts and ran it on
my Quartz64. I tested PCIe2x1 on the one combphy and SATA on the
other, simultaneously. Devices were detected correctly (with some
hiccups on SATA due to a Quartz64 Model A design issue, but it
was detected eventually) and some transfers were done to ensure
it's stable. It is stable.

Regards,
Nicolas Frattaroli



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel