[PATCH v5 3/5] watchdog: da9062: reset board on watchdog timeout
From: Andrej Picej <hidden>
Date: 2021-12-06 06:47:48
Also in:
linux-devicetree, linux-watchdog, lkml
Subsystem:
dialog semiconductor drivers, the rest, watchdog device drivers · Maintainers:
Support Opensource, Linus Torvalds, Wim Van Sebroeck, Guenter Roeck
Implement a method to change watchdog timeout configuration based on DT
binding ("dlg,wdt-sd"). There is a possibility to change the behaviour
of watchdog reset. Setting WATCHDOG_SD bit enables SHUTDOWN mode, and
clearing it enables POWERDOWN mode on watchdog timeout.
If no DT binding is specified the WATCHDOG_SD bit stays in default
configuration, not breaking behaviour of devices which might depend on
default fuse configuration.
Note: This patch requires that the config register CONFIG_I is
configured as writable in the da9061/2 multi function device.
Signed-off-by: Andrej Picej <redacted>
---
Changes in v5:
- fix spelling mistake in commit message
Changes in v4:
- move the code to probe function
Changes in v3:
- no changes
Changes in v2:
- don't force the "reset" for all da9062-watchdog users, instead add DT
binding where the behavior can be selected
---
drivers/watchdog/da9062_wdt.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c
index f02cbd530538..bd85f84b0fd4 100644
--- a/drivers/watchdog/da9062_wdt.c
+++ b/drivers/watchdog/da9062_wdt.c@@ -195,8 +195,11 @@ static int da9062_wdt_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; unsigned int timeout; + unsigned int mask; struct da9062 *chip; struct da9062_watchdog *wdt; + int ret; + u32 val; chip = dev_get_drvdata(dev->parent); if (!chip)
@@ -236,6 +239,30 @@ static int da9062_wdt_probe(struct platform_device *pdev) set_bit(WDOG_HW_RUNNING, &wdt->wdtdev.status); } + /* + * Configure what happens on watchdog timeout. Can be specified with + * "dlg,wdt-sd" dt-binding (0 -> POWERDOWN, 1 -> SHUTDOWN). + * If "dlg,wdt-sd" dt-binding is NOT set use the default. + */ + ret = device_property_read_u32(dev, "dlg,wdt-sd", &val); + if (!ret) { + if (val) + /* Use da9062's SHUTDOWN mode */ + mask = DA9062AA_WATCHDOG_SD_MASK; + else + /* Use da9062's POWERDOWN mode. */ + mask = 0x0; + + ret = regmap_update_bits(wdt->hw->regmap, + DA9062AA_CONFIG_I, + DA9062AA_WATCHDOG_SD_MASK, + mask); + + if (ret) + dev_err(dev, "failed to set wdt reset mode: %d\n", + ret); + } + return devm_watchdog_register_device(dev, &wdt->wdtdev); }
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel