Re: [PATCH 0/6] spear: Fix SPEAr3XX plgpio support
From: Herve Codina <herve.codina@bootlin.com>
Date: 2021-12-02 11:49:24
Also in:
linux-devicetree, linux-gpio, lkml
On Thu, 2 Dec 2021 16:57:00 +0530 Viresh Kumar [off-list ref] wrote:
On 02-12-21, 10:52, Herve Codina wrote:quoted
Hi, This patch series fixes the plgpio support on SPEAr3xx SOCs. The first four patches of this series fixes a ressources sharing issue between the plgpio driver and the pinmux driver. Indeed, these two drivers can use the same IO address range on some SPEAr3xx SOCs. To solve the issue, a regmap (syscon managed) is used in both drivers and the plgpio driver can reference the pinmux regmap to use it. The second part of this series is related to IRQs. The plgpio on SPEAr320s SOC uses an IRQ line in the reserve range (from SPEAr320 point of view). This issue is fixed enabling all the 'reserved' IRQs and adding a dtsi file for the SPEAr320s with the correct interrupt for the plgpio node.Are these changes backwards compatible ? I mean new kernel will work with old DTBs ? It may be quite important to not break that here.
Yes they are. - the regmap reference (phandle) is optional. - The IRQ for plgpio is used only on the new spear320s.dtsi. I have not seen any issues on my board (spear320s SOC) when I only add support for the 'reserved' IRQs (ie no spurious interrupts occur when I apply the patch related to shirq). I cannot test on SPEAr320 SOC as I haven't got any board with this SOC. Herve -- Hervé Codina, Bootlin Embedded Linux and Kernel engineering https://bootlin.com _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel