Re: [PATCH v2 2/2] dt-bindings: bus: imx-weim: add words about continuous bclk
From: Rob Herring <robh@kernel.org>
Date: 2021-12-01 22:18:42
Also in:
linux-devicetree, lkml
On Wed, Nov 24, 2021 at 08:55:42PM +0300, Ivan Bornyakov wrote:
Document continuous Burst Clock option. With this option Burst Clock, if enabled, will output continuous clock, otherwise Burst Clock will output clock only when necessary.
Missing S-o-b. checkpatch.pl will tell you this.
quoted hunk ↗ jump to hunk
--- Documentation/devicetree/bindings/bus/imx-weim.txt | 5 +++++ 1 file changed, 5 insertions(+)diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt index 1b1d1c5c21ea..e7f502070d77 100644 --- a/Documentation/devicetree/bindings/bus/imx-weim.txt +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt@@ -48,6 +48,11 @@ Optional properties: devices, the presence of this property indicates that the weim bus should operate in Burst Clock Mode. + - fsl,continuous-burst-clk Make Burst Clock to output continuous clock. + Without this option Burst Clock will output clock + only when necessary. This takes effect only if + "fsl,burst-clk-enable" is set. + Timing property for child nodes. It is mandatory, not optional. - fsl,weim-cs-timing: The timing array, contains timing values for the-- 2.32.0
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel