Thread (13 messages) 13 messages, 4 authors, 2021-11-25

RE: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP

From: Peng Fan <peng.fan@nxp.com>
Date: 2021-11-25 09:13:28
Also in: linux-devicetree, linux-i2c, linux-mmc, linux-serial, linux-spi, linux-watchdog, lkml

Hi Shawn,
Subject: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP

From: Peng Fan <peng.fan@nxp.com>


V5:
 only fix patch 8/8 "arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk
board"
  - Correct bus-width to 8 for eMMC
  - Drop pinctrl enet which no user
 Drop patch 1/9 in V4, since in merged in linux-next  Add A-b/R-b tag

V4:

https://lists.infradead.org/pipermail/linux-arm-kernel/2021-November/6960
20.html

I just pick-up Jacky's work, rebase and send out V4 based on Jacky's V3
patchset.

If you prefer to split the patchset and send single patches, I could resend one
by one.

Note: the V3 has a gpio bindings patch, it has been separated and sent to gpio
list in a single one per Linus requested.

This patchset is to add i.MX8ULP in dt-bindings, introduce basic i.MX8ULP dtsi
and basic evk board support.

The detailed version changes are in each patch.

There is checkpatch error in patch 8, but that is for device tree macro and we
could use use "(xx)".

In V4, the changes are in patch 8, 9 when rebasing to linux-next/master ,fix
build errors after the clk driver in tree and drop a few nodes that not have
bindings.

Tested with CONFIG_CLK_IMX8ULP and CONFIG_PINCTRL_IMX8ULP
enabled.

V3:

https://lore.kernel.org/linux-arm-kernel/20210625011355.3468586-6-ping.b
ai@nxp.com/T/

Jacky Bai (8):
  dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string
  dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string
  dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string
  dt-bindings: timer: tpm-timer: Add imx8ulp compatible string
  dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string
  dt-bindings: arm: fsl: Add binding for imx8ulp evk
  arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board
For the several dt-bindings, patch 3 has been taken by SPI maintainer, 

All patches have got R-b or A-b tag.

would you pick others bindings or they should go through subsystem
maintainer's tree?

Thanks,
Peng.
 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../bindings/i2c/i2c-imx-lpi2c.yaml           |   4 +-
 .../bindings/serial/fsl-lpuart.yaml           |   4 +-
 .../bindings/spi/spi-fsl-lpspi.yaml           |  11 +-
 .../bindings/timer/nxp,tpm-timer.yaml         |   6 +-
 .../bindings/watchdog/fsl-imx7ulp-wdt.yaml    |   7 +-
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts |  64 ++
 .../boot/dts/freescale/imx8ulp-pinfunc.h      | 978 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi    | 396 +++++++
 10 files changed, 1468 insertions(+), 9 deletions(-)  create mode 100644
arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
 create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h
 create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi

--
2.25.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help