[PATCH v2 04/11] mmc: bcm2835: stop setting chan_config->slave_id
From: Arnd Bergmann <arnd@kernel.org>
Date: 2021-11-22 22:23:06
Also in:
alsa-devel, dmaengine, dri-devel, linux-arm-msm, linux-mmc, linux-serial, linux-spi, linux-staging, linux-tegra, lkml
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, the rest · Maintainers:
Ulf Hansson, Linus Torvalds
From: Arnd Bergmann <arnd@arndb.de> The field is not interpreted by the DMA engine driver, as all the data is passed from devicetree instead. Remove the assignment so the field can eventually be deleted. Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- drivers/mmc/host/bcm2835.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
index 8c2361e66277..463b707d9e99 100644
--- a/drivers/mmc/host/bcm2835.c
+++ b/drivers/mmc/host/bcm2835.c@@ -1293,14 +1293,12 @@ static int bcm2835_add_host(struct bcm2835_host *host) host->dma_cfg_tx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; host->dma_cfg_tx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - host->dma_cfg_tx.slave_id = 13; /* DREQ channel */ host->dma_cfg_tx.direction = DMA_MEM_TO_DEV; host->dma_cfg_tx.src_addr = 0; host->dma_cfg_tx.dst_addr = host->phys_addr + SDDATA; host->dma_cfg_rx.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; host->dma_cfg_rx.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - host->dma_cfg_rx.slave_id = 13; /* DREQ channel */ host->dma_cfg_rx.direction = DMA_DEV_TO_MEM; host->dma_cfg_rx.src_addr = host->phys_addr + SDDATA; host->dma_cfg_rx.dst_addr = 0;
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel