On Sun, Nov 21, 2021 at 8:21 AM Fabio Estevam [off-list ref] wrote:

Hi Adam,

On Sun, Nov 21, 2021 at 11:17 AM Adam Ford [off-list ref] wrote:

quoted

I am using https://source.codeaurora.org/external/imx/imx-atf/log/?h=lf_v2.4

Since the driver sending SMCC commands to ATF isn't doing that, I
assume it's safe to use the linux power-domain drivers with the ATF
from NXP's kernel.

If you can point me to the repo you think I should be using, I'll give it a try.

Do you know if the mainline TF-A repo v2.5 works too?
https://github.com/ARM-software/arm-trusted-firmware/tree/v2.5

That's good to know.

I just built it into U-Boot:

NOTICE:  BL31: v2.5(release):v2.5
NOTICE:  BL31: Built : 08:24:13, Nov 21 2021

The Etnaviv driver is still loading without hanging

root@beacon-imx8mn-kit:~# dmesg |grep -i etna
[   12.393936] etnaviv etnaviv: bound 38000000.gpu (ops gpu_ops [etnaviv])
[   12.400676] etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203
[   12.641297] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0

Thanks

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel