[RFC PATCH v4 net-next 20/23] net: dsa: seville: name change for clarity from pcs to mdio_device
From: Colin Foster <colin.foster@in-advantage.com>
Date: 2021-11-16 06:36:58
Also in:
linux-gpio, lkml, netdev
Subsystem:
networking drivers, networking [dsa], ocelot ethernet switch driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Vladimir Oltean, Linus Torvalds
A simple variable update from "pcs" to "mdio_device" for the mdio device will make things a little cleaner. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> --- drivers/net/dsa/ocelot/seville_vsc9953.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index 49fc8220d636..268c09042824 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c@@ -1027,7 +1027,7 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot) for (port = 0; port < felix->info->num_ports; port++) { struct ocelot_port *ocelot_port = ocelot->ports[port]; struct phylink_pcs *phylink_pcs; - struct mdio_device *pcs; + struct mdio_device *mdio_device; int addr = port + 4; if (dsa_is_unused_port(felix->ds, port))
@@ -1036,13 +1036,13 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot) if (ocelot_port->phy_mode == PHY_INTERFACE_MODE_INTERNAL) continue; - pcs = mdio_device_create(felix->imdio, addr); + mdio_device = mdio_device_create(felix->imdio, addr); if (IS_ERR(pcs)) continue; - phylink_pcs = lynx_pcs_create(pcs); + phylink_pcs = lynx_pcs_create(mdio_device); if (!phylink_pcs) { - mdio_device_free(pcs); + mdio_device_free(mdio_device); continue; }
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel