Thread (13 messages) 13 messages, 4 authors, 2021-11-04
STALE1681d
Revisions (3)
  1. v5 [diff vs current]
  2. v6 [diff vs current]
  3. v7 current

[PATCH v7 2/7] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators

From: Jim Quinlan <jim2101024@gmail.com>
Date: 2021-11-03 18:49:58
Also in: linux-devicetree, linux-pci, lkml
Subsystem: broadcom bcm2711/bcm2835 arm architecture, broadcom bcm7xxx arm architecture, broadcom stb pcie driver, open firmware and flattened device tree bindings, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers: Florian Fainelli, Jim Quinlan, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds

Similar to the regulator bindings found in "rockchip-pcie-host.txt", this
allows optional regulators to be attached and controlled by the PCIe RC
driver.  That being said, this driver searches in the DT subnode (the EP
node, eg pci-ep@0,0) for the regulator property.

The use of a regulator property in the pcie EP subnode such as
"vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml
file at

https://github.com/devicetree-org/dt-schema/pull/63

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
---
 .../bindings/pci/brcm,stb-pcie.yaml           | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 508e5dce1282..ef2427320b7d 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -158,5 +158,28 @@ examples:
                                  <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                     brcm,enable-ssc;
                     brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
+
+                    /* PCIe bridge */
+                    pci@0,0 {
+                            #address-cells = <3>;
+                            #size-cells = <2>;
+                            reg = <0x0 0x0 0x0 0x0 0x0>;
+                            compatible = "pciclass,0604";
+                            device_type = "pci";
+                            vpcie3v3-supply = <&vreg7>;
+                            ranges;
+
+                            /* PCIe endpoint */
+                            pci-ep@0,0 {
+                                    assigned-addresses =
+                                        <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+                                    reg = <0x0 0x0 0x0 0x0 0x0>;
+                                    compatible = "pci14e4,1688";
+                                    #address-cells = <3>;
+                                    #size-cells = <2>;
+
+                                    ranges;
+                            };
+                    };
             };
     };
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help