Thread (32 messages) 32 messages, 8 authors, 2021-11-02

Re: [PATCH] clk: composite: Also consider .determine_rate for rate + mux composites

From: Robin Murphy <robin.murphy@arm.com>
Date: 2021-11-01 21:59:24
Also in: linux-clk, linux-rockchip, lkml

On 2021-11-01 20:58, Martin Blumenstingl wrote:
Hi Guillaume,

On Mon, Nov 1, 2021 at 9:19 PM Guillaume Tucker
[off-list ref] wrote:
quoted
Hi Martin,

Please see the bisection report below about a boot failure on
rk3328-rock64.

Reports aren't automatically sent to the public while we're
trialing new bisection features on kernelci.org but this one
looks valid.

Some more details can be found here:

   https://linux.kernelci.org/test/case/id/617f11f5c157b666fb3358e6/

Here's what appears to be the cause of the problem:

[    0.033465] CPU: CPUs started in inconsistent modes
[    0.033557] Unexpected kernel BRK exception at EL1
[    0.034432] Internal error: BRK handler: f2000800 [#1] PREEMPT SMP
What's weird is that that's really just the same WARN that's also 
present in 'successful' logs, except for some reason it's behaving as if 
the break handler hasn't been registered, despite that having happened 
long before we got to smp_init(). At this point we're also still some 
way off getting as far as initcalls, so I'm not sure that the clock 
driver would be in the picture at all yet.

Is the bisection repeatable, or is this just random flakiness misleading 
things? I'd also note that you need pretty horrifically broken firmware 
to hit that warning in the first place, which might cast a bit of doubt 
over the trustworthiness of that board altogether.

Robin.
quoted
There doesn't appear to be any other platform in KernelCI showing
the same issue.
That's a strange error for the changes from my patch.
At first glance I don't see any relation to clk-composite code:
- the call trace doesn't have any references to CCF or rockchip clock drivers
- clk-rk3328.c uses drivers/clk/rockchip/clk-cpu.c to register the CPU
clock which does not use clk-composite

Chen-Yu has tested this patch (plus [0]) on RK3399 and didn't observe
any problems.
So maybe this is a RK3328 specific issue?
Anyways, I am interested in fixing this issue because reverting is
becoming more and more complex (since I think we're at eight commits
which would need to be reverted in total).
quoted
Please let us know if you need help debugging the issue or if you
have a fix to try.
Could you please try [0] which is the second patch in the series which
finally made it upstream.
This second patch is not in 5.15 because I believed that it's only
something to make the code in clk-composite.c more future-proof. It's
not a condition that I am aware of.

I don't have any Rockchip boards myself.
So I am thankful for any help I can get.


Best regards,
Martin


[0] https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/commit/?h=clk-next&id=6594988fd625ff0d9a8f90f1788e16185358a3e6

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help