[PATCH v5 16/18] arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core
From: Lucas Stach <l.stach@pengutronix.de>
Date: 2021-10-02 01:00:22
Also in:
linux-devicetree
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
From: Frieder Schrempf <redacted>
According to the documents, the i.MX8M-Mini features a GC320 and a
GCNanoUltra GPU core. Etnaviv detects them as:
etnaviv-gpu 38000000.gpu: model: GC600, revision: 4653
etnaviv-gpu 38008000.gpu: model: GC520, revision: 5341
This seems to work fine more or less without any changes to the HWDB,
which still might be needed in the future to correct some features,
etc.
[lst]: Added power domains and switched clock assignments to the
new clock defines used for the composite clocks, instead of
relying on the backwards compat defines.
Signed-off-by: Frieder Schrempf <redacted>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 31 +++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index d8c53ffb5fff..6009e54266f0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi@@ -1139,6 +1139,37 @@ gpmi: nand-controller@33002000{ status = "disabled"; }; + gpu_3d: gpu@38000000 { + compatible = "vivante,gc"; + reg = <0x38000000 0x8000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPU_AHB>, + <&clk IMX8MM_CLK_GPU_BUS_ROOT>, + <&clk IMX8MM_CLK_GPU3D_ROOT>, + <&clk IMX8MM_CLK_GPU3D_ROOT>; + clock-names = "reg", "bus", "core", "shader"; + assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>, + <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-rates = <0>, <1000000000>; + power-domains = <&pgc_gpu>; + }; + + gpu_2d: gpu@38008000 { + compatible = "vivante,gc"; + reg = <0x38008000 0x8000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPU_AHB>, + <&clk IMX8MM_CLK_GPU_BUS_ROOT>, + <&clk IMX8MM_CLK_GPU2D_ROOT>; + clock-names = "reg", "bus", "core"; + assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>, + <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-rates = <0>, <1000000000>; + power-domains = <&pgc_gpu>; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel