On Sat, Oct 9, 2021 at 11:27 AM Adam Ford [off-list ref] wrote:

The blk-ctrl and the GPCv2 in the i.MX8MN is similar but slightly different to that
of the i.MX8MM.  This series is based on work from Lucas Stach for i.MX8MM, but
adapted for i.MX8MN.  With the additional power domains and blk-ctrl enabled,
additional peripherals like gpu and USB can be enabled.

V2:  Add mising patches for expanding GPCv2 which are necessary
       to make the blk-ctl operate.
     Fix clk names
     Fix missing references to structures in blk-ctl driver to link
       them to the device tree.

I know Rob had some feedback on the DT bindings updates.  I can
address them in V3, I was hoping to get some feedback from this series
from others who may be interested.

I don't know if it's too late to get this into 5.16 or not, but I'll
submit a V3 this weekend.

adam

Adam Ford (9):
  soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
  soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
  dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
  dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
  soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
  arm64: dts: imx8mn: add GPC node
  arm64: dts: imx8mn: put USB controller into power-domains
  arm64: dts: imx8mn: add DISP blk-ctrl
  arm64: dts: imx8mn: Enable GPU

 .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml     |  97 +++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mn.dtsi     | 103 ++++++++++++++++++
 drivers/soc/imx/gpcv2.c                       |  26 +++++
 drivers/soc/imx/imx8m-blk-ctrl.c              |  75 ++++++++++++-
 include/dt-bindings/power/imx8mn-power.h      |   5 +
 5 files changed, 305 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml

--
2.25.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel