Re: [PATCH] ARM: dts: BCM5301X: Fix I2C controller interrupt
From: Christian Lamparter <hidden>
Date: 2021-10-27 20:32:47
Also in:
linux-devicetree, lkml
On 27/10/2021 21:37, Florian Fainelli wrote:
The I2C interrupt controller line is off by 32 because the datasheet describes interrupt inputs into the GIC which are for Shared Peripheral Interrupts and are starting at offset 32. The ARM GIC binding expects the SPI interrupts to be numbered from 0 relative to the SPI base.
>
Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Thank you! This fixed the MR32 iproc-i2c issue.
It's working now (will post the patch for the MR32 tomorrow):
# cat /proc/interrupts
CPU0 CPU1
24: 1 0 GIC-0 27 Edge gt
25: 110418 108252 GIC-0 29 Edge twd
26: 476 0 GIC-0 117 Level gpio, ttyS0
31: 128 0 GIC-0 121 Level 18009000.i2c <--- YES!
32: 49477 0 GIC-0 100 Level brcmnand
33: 0 0 GIC-0 109 Level mspi_done
34: 0 0 GIC-0 110 Level mspi_halted
35: 0 0 GIC-0 104 Level spi_lr_fullness_reached
36: 0 0 GIC-0 105 Level spi_lr_session_aborted
37: 0 0 GIC-0 106 Level spi_lr_impatient
38: 0 0 GIC-0 107 Level spi_lr_session_done
40: 7227 0 GIC-0 179 Level eth2
51: 0 0 BCMA-GPIO 21 Edge keys
and the attached AT24 + PoE-Power monitor can be probed + read as before.
[ 12.042576] at24 0-0050: 8192 byte 24c64 EEPROM, read-only
...
[ 12.077671] ina2xx 0-0045: power monitor ina219 (Rshunt = 60000 uOhm)
Tested-by: Christian Lamparter <redacted>
Regards
Christian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel