Add an operating-points table and cooling entry to the GPU on the
RK3328 SoC to improve its performance. According to its datasheet[1]
the maximum frequency of the Mali-450 MP2 GPU found on the RK3328 SoC
is 500MHz.

On my rock64 device, under x11, glmark2-es2 performance increased from
around 60 to just over 100. Same device running glmark2-es2 under
wayland/weston improved from just over 100 to just over 200.

[1] https://rockchip.fr/RK3328%20datasheet%20V1.2.pdf

Signed-off-by: Trevor Woerner <redacted>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 26 +++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi

b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 8c821acb21ff..5e1dcf71e414
100644

--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -532,7 +532,8 @@ map0 {
 					cooling-device = <&cpu0 

 					contribution = <4096>;
 				};
 			};

@@ -617,6 +618,29 @@ gpu: gpu@ff300000 {
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
 		clock-names = "bus", "core";
 		resets = <&cru SRST_GPU_A>;
+		operating-points-v2 = <&gpu_opp_table>;
+		#cooling-cells = <2>;
+	};
+
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000>;
+		};
 	};

 	h265e_mmu: iommu@ff330200 {